China China High Quality PFA Lining Material Factory – DY-1020-01 Power battery Grade PVDF – DONGTAI Manufacturer and Supplier

China High Quality PFA Lining Material Factory – DY-1020-01 Power battery Grade PVDF – DONGTAI

short description:

Send email to us

Product Detail

Product Tags

Feedback (2)

The company upholds the philosophy of "Be No.1 in quality, be rooted on credit and trustworthiness for growth", will continue to serve old and new customers from home and overseas whole-heatedly for Good Dispersion Titanium Dioxide, PVDF Powder, Pp Nucleating Agent, We would like to take this opportunity to establish long-term business relationships with clients from all over the world.

China High Quality PFA Lining Material Factory – DY-1020-01 Power battery Grade PVDF – DONGTAI Detail:

Typital Properties

NO.	NAME OF INDEX	Test method	UNIT	JSL-21
1	Appearance	Visual Observation	-	White powder,No visible impurity
2	Solubility	Visual Observation	-	Clear and transparent, no impurity
3	Particle Size	ISO 22412	um	≤110(D50)
4	Relative Density	GB/T 1033.1	g/cm³	1.75-1.77
5	Moisture Content	HG/T2902	Wt%	≤0.10
6	Rotary Viscosity	10.28gPVDF/100mlNMP,30℃	mPa.s	5000~10000
7	Melting Point	GB/T 19466.3	℃	160-170
8	Thermal Decomposition Temperature	TGA	℃	≥370
9	Weight-average Molecular Weight	GPC，DMF		800000~1100000
10	Molecular Weight Distribution	GPC，DMF		3.0~4.0

The index standard refers to T / FSI 027-2019, and the index data is only for customers’ reference.

Instructions

Addition suggestions: Ternary systems （NCM523、NCM622、NCM811、NCA811）：1.2-1.8%；

LEP systems : 2.2-2.8%；LMO systems：1.3-1.7%；LCO systems：1.0-1.2%

(The amount of addition is adjusted according to the density and specific surface area of the positive electrode material.)

How to use: Stir at a high speed for 1-1.5 hours when the wet glue is used, then enter the pulping process after the PVDF is completely dissolved. Due to the large molecular weight of PVDF resin and slow dissolution rate, the stirring time can be increased. PVDF is added to the stirring tank in batches and the stirring temperature is increased to improve the dissolution rate.

Storage and Attention

PVDF Packaged in a two-layer polyethylene plastic bag. Products should be stored in clean, dry warehouses to prevent the introduction of impurities. This product is non-toxic and harmless at room temperature, but it should be noted that the processing temperature should not exceed 350 ℃, so as to prevent toxic gas from decomposition.

Product detail pictures:

Related Product Guide:

In the past few years, our business absorbed and digested advanced technologies both equally at home and abroad. In the meantime, our company staffs a group of experts devoted to your advancement of China High Quality PFA Lining Material Factory – DY-1020-01 Power battery Grade PVDF – DONGTAI , The product will supply to all over the world, such as: Malaysia, Paraguay, Naples, With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we're trying our best to be your good partner.

FKM Compound