China China High Quality PFA For High Temperature Electric Wire Suppliers – DY-1020-01 Power battery Grade PVDF – DONGTAI Manufacturer and Supplier

China High Quality PFA For High Temperature Electric Wire Suppliers – DY-1020-01 Power battery Grade PVDF – DONGTAI

short description:

Send email to us

Product Detail

Product Tags

Feedback (2)

We will make just about every exertion for being excellent and perfect, and speed up our actions for standing during the rank of worldwide top-grade and high-tech enterprises for Impact Modifier For PVC Pipes, Polyester Chips Textile Grade, Titanium Dioxide For Abs Resin, "Quality 1st, Rate least expensive, Provider best" is definitely the spirit of our company. We sincerely welcome you to go to our business and negotiate mutual small business!

China High Quality PFA For High Temperature Electric Wire Suppliers – DY-1020-01 Power battery Grade PVDF – DONGTAI Detail:

Typital Properties

NO.	NAME OF INDEX	Test method	UNIT	JSL-21
1	Appearance	Visual Observation	-	White powder,No visible impurity
2	Solubility	Visual Observation	-	Clear and transparent, no impurity
3	Particle Size	ISO 22412	um	≤110(D50)
4	Relative Density	GB/T 1033.1	g/cm³	1.75-1.77
5	Moisture Content	HG/T2902	Wt%	≤0.10
6	Rotary Viscosity	10.28gPVDF/100mlNMP,30℃	mPa.s	5000~10000
7	Melting Point	GB/T 19466.3	℃	160-170
8	Thermal Decomposition Temperature	TGA	℃	≥370
9	Weight-average Molecular Weight	GPC，DMF		800000~1100000
10	Molecular Weight Distribution	GPC，DMF		3.0~4.0

The index standard refers to T / FSI 027-2019, and the index data is only for customers’ reference.

Instructions

Addition suggestions: Ternary systems （NCM523、NCM622、NCM811、NCA811）：1.2-1.8%；

LEP systems : 2.2-2.8%；LMO systems：1.3-1.7%；LCO systems：1.0-1.2%

(The amount of addition is adjusted according to the density and specific surface area of the positive electrode material.)

How to use: Stir at a high speed for 1-1.5 hours when the wet glue is used, then enter the pulping process after the PVDF is completely dissolved. Due to the large molecular weight of PVDF resin and slow dissolution rate, the stirring time can be increased. PVDF is added to the stirring tank in batches and the stirring temperature is increased to improve the dissolution rate.

Storage and Attention

PVDF Packaged in a two-layer polyethylene plastic bag. Products should be stored in clean, dry warehouses to prevent the introduction of impurities. This product is non-toxic and harmless at room temperature, but it should be noted that the processing temperature should not exceed 350 ℃, so as to prevent toxic gas from decomposition.

Product detail pictures:

Related Product Guide:

We're proud from the higher client fulfillment and wide acceptance due to our persistent pursuit of high quality both on product and service for China High Quality PFA For High Temperature Electric Wire Suppliers – DY-1020-01 Power battery Grade PVDF – DONGTAI , The product will supply to all over the world, such as: Algeria, Peru, Brunei, With a team of experienced and knowledgeable personnel, our market covers South America, the USA, the Mid East, and North Africa. Many customers have become our friends after good cooperation with us. If you have the requirement for any of our products, please contact us now. We are looking forward to hearing from you soon.

Coating Grade PVDF